Skip to content
QUESTION? ASK AN EXPERT
PROJECT? TELL US MORE
925-267-9833
About
Our Company
Our News
Markets
Water & Wastewater Treatment
Water Recycling & Reuse
Drinking Water
Environmental Remediation
Solutions
HiPOx
Overview
Advantages
Targeted Contaminants
Case Studies
PulseOx
Overview
Advantages
Targeted Contaminants
Case Studies
ARoNite
Overview
Advantages
Targeted Contaminants
Case Studies
Services
Water Treatment as a Service
Laboratory Testing
Pilot Scale Testing
Total Solution Design & Build
Aftermarket Sales & Services
Ops & Maintenance & Emergency Response
Contact
Menu
About
Our Company
Our News
Markets
Water & Wastewater Treatment
Water Recycling & Reuse
Drinking Water
Environmental Remediation
Solutions
HiPOx
Overview
Advantages
Targeted Contaminants
Case Studies
PulseOx
Overview
Advantages
Targeted Contaminants
Case Studies
ARoNite
Overview
Advantages
Targeted Contaminants
Case Studies
Services
Water Treatment as a Service
Laboratory Testing
Pilot Scale Testing
Total Solution Design & Build
Aftermarket Sales & Services
Ops & Maintenance & Emergency Response
Contact
LABORATORY TESTING SERVICES
LABORATORY TESTING SERVICES
Bench Testing
A bench test is used to determine effectiveness and efficiency of HiPOx technology to achieve the customer’s treatment objectives
Bench test is a necessary design tool
Determine appropriate dose rates of O3 and H2O2 for scale-up to field units
Correlation of results are very good and scale-up has been successful
The results of bench test may allow for a Performance Guarantee
If project is unique, new, or extremely challenging, then the BT may be a preliminary step towards a pilot
Bench Test
Pre-defined number of runs at different doses rates
Curves provide a model, and can be used to predict dose requirement for any required destruction
Typical Case In Environmental Remediation:
Typical Case In Environmental Remediation:
H&A – Boeing, Huntington Beach, CA
2600 ug/L of 1,4 – Dioxane, 130,000 ug/L of IPA, 150,000 ug/L of Acetone
Treatment Objective
1,4-Dioxane: NPDES discharge goal (<3 ug/L) and POTW discharge goal (<20 ug/L)
Acetone (<20,000 ug/L), IPA (<160,000 ug/L), and Methylene Chloride (<20 ug/L)
Typical Case In Industrial Process Water
Influent COD = 180 mg/L
Treatment Objective COD < 100 mg/L
Services
Water Treatment as a Service
Laboratory Testing
Pilot Scale Testing
Total Solution Design & Build
Aftermarket Sales & Services
Ops & Maintenance & Emergency Response